What should I do if the packaging falls off during the operation of the packaging machine?
When there is a problem with the packaging machine,(China bottle cartoning machine manufacturers) first of all, we should check carefully to see where it appears. When we're not sure, we can also listen with our ears to see if there are air leaks or unusual noises anywhere.
(multi-lane strip packaging machine supplier china)
How to solve the problem that the packaged package will fall off during the feeding process of the packaging machine?
1. Stop the work of the packaging machineand check whether the two rubber pads on one side of the main bag are damaged. If the pouch falls due to this, please contact the assembler in time to stabilize or replace it.
2. Check whether the swing arm straightens the bag. Occasionally, one side of the bag is sent to this position, while the other side of the main and side clamps is not clamped. There are several possibilities for this to happen:
(1) The photoelectric position detected by the bag entrance is too far forward or too backward. At this time, the swing arm and the bag opening suction cup cannot send the bag straight. The photoelectric position should be adjusted to be parallel to the edge of the bag mouth and the leading edge of the opening position.
(2) The packaging bag placed in the garbage bag is not straight at the beginning. Stop the packaging machine and place the bags neatly into the bag compartment.
(3) After working for a long time, the suction cup of the bag will be flattened, deformed, damaged and leaked, so that the suction cup can be restored to normal or replaced.
(4) (China automatic blister packaging machine factory)If the suction cup of the bag mouth is damaged or the vacuum degree is not enough, the vacuum filter and leather tube should be replaced or cleaned. Always check the air supply line for leaks or damage.
(5) If the inner and outer chains fall off seriously or the inner and outer chains are not straight, it will also affect the opening quality of the packaging bag. When this happens, the opening of the bag will not be straight and the bag on the swing arm will not send the bag to the correct position.