Home > News > Industry News > How to use the filling machine? How to maintain it? How to install?

How to use the filling machine? How to maintain it? How to install?

How to use the filling machine? How to maintain it? How to install?

JYT 2022-04-08 17:45:56

Filling machines are mainly a small category of products in packaging machines. From the perspective of packaging materials, they can be divided into liquid filling machines, paste filling machines, powder filling machines, and granule filling machines; from the degree of automation of production. It is divided into semi-automatic filling machine and automatic filling production line.


Instructions for use
1. Because the filling machine(spice powder filling machine is an automatic machine, the dimensions of the easy-to-pull bottle, bottle pad and bottle cap are required to be unified.
2. Before driving, you must use the crank handle to turn the machine to see if there is any abnormality in its rotation, and it can be confirmed that it is normal before driving.
3. When adjusting the machine, the tools should be used properly. It is strictly forbidden to use too large tools or excessive force to disassemble the parts to avoid damaging the parts or affecting the performance of the machine.
4. Whenever the machine is adjusted, the loosened screws must be tightened, and the machine can be driven only after turning the machine with the crank handle to check whether its action meets the requirements.
5. The machine must be kept clean. It is strictly forbidden to have oil stains, liquid medicine or glass debris on the machine, so as to avoid damage to the machine, so it is necessary to:
(1) During the production process of the machine, the liquid medicine or glass debris should be removed in time.
(2)Before the shift, all parts of the machine surface should be cleaned once, and clean lubricating oil should be added to each activity department.
(3) It should be scrubbed once a week, especially the places that are not easy to be cleaned in ordinary use or blow it with compressed air.


Disinfect and Rinsing
1. Loosen the upper and lower set screws, remove the liquid injection system for overall disinfection, or disassemble for disinfection and cleaning separately.
2. Put the liquid inlet pipe in the cleaning solution and start the cleaning.
3. There may be errors in the actual filling of the 500ml model, and the measuring cylinder should be measured before the official filling.
4. Needle tube for filling machine, standard 5ml or 10ml syringe for type 10, 20ml glass filler for type 20, and 100ml glass filler for type 100.


Installation Precautions
1. After the machine is unpacked, first check whether the random technical data is complete and whether the machine is damaged during transportation, so as to solve it in time.
2. Install and adjust the feeding and discharging components according to the outline diagrams in this manual.
3. Add new lubricating oil to each lubricating point.
4. Use the crank handle to turn the machine to check whether the machine is running in the correct direction (counterclockwise when facing the main shaft of the motor). The machine must be protected and grounded.