How to use the granule packaging machine, what should be paid attention to when using the granule packaging machine?

As a mechanized packaging equipment in the packaging industry, the automatic granule packaging machine has a wide range of applications and can be used to package granular products such as salt, chicken essence, monosodium glutamate, coffee(chips packing machine), peanuts, feed, and cold medicine. Then let's take a look How to use the automatic granule packaging machine and how to set the sealing temperature.

First, the use of automatic granule packaging machine

1. After the equipment is installed, fix the equipment with expansion screws, and connect the power cord and gas pipeline reliably. No-load test drive can be used only after it is correct.
2. Equipment maintenance personnel should regularly add lubricating oil to the reducer, bearings and other parts that need to be lubricated. Regularly check whether the fasteners of the equipment are loose.
3. The air source pressure should be stable, and ensure that the air source gas is clean and dry, and the user air source must have an oil mist filter device to ensure that the compressed air contains oil mist for lubrication of the cylinder and ensure the service life of the pneumatic components.
4. The equipment should be used indoors, and electrical components, motors, etc. cannot be splashed with water. Cylinders, buttons, sensors, etc. cannot be artificially added with dust, particles and other dirt to avoid equipment damage. 5. The operating voltage of the equipment is 380V, 220V, and the operator must It can be operated after training.

Secondly, the sealing temperature setting method of the automatic granule packaging machine

Turn on the power switch of the automatic particle packaging machine, and set the heat sealing temperature on the horizontal and vertical sealing digital temperature controllers according to the packaging materials used. The determination of the heat sealing temperature is related to the type of packaging material, packaging speed, sealing The sealing pressure is closely related. Therefore, when setting the temperature, it is necessary to comprehensively consider the above factors. The different heat sealing set temperatures of different packaging materials and the different heat sealing set temperatures of the packaging materials used need to be determined by testing.

Appropriate heat sealing temperature.

When the packaging speed is high, the heat sealing temperature should be appropriately increased; when the packaging speed is low, the heat sealing temperature can be appropriately reduced; when the sealing pressure is large, the heat sealing temperature can be appropriately reduced; when the sealing pressure is small, the heat sealing temperature should be appropriately increased. Usually , Considering the influence of the roller on the sealing and the influence of the packaged material, the temperature of the vertical seal should be set lower than the temperature of the horizontal seal (about 10 ℃ lower). In short, the principle of setting the sealing temperature is to make The packaging bag is tightly sealed, the sealing part is flat, the lines are clear, and there is no deformation.

The above is the use method and sealing temperature setting method of the automatic granule packaging machine. If you have any other questions, you can consult us.