Home > News > Solutions > How to solve the fault of heat shrinkable film packaging machine?
Certifications

How to solve the fault of heat shrinkable film packaging machine?

How to solve the fault of heat shrinkable film packaging machine?

JYT 2022-07-04 18:34:35

Heat shrink packaging machine is a device that wraps and seals objects by heat shrink film, which is widely used in various objects, especially products with boxes, such as books, notebooks, cosmetics, daily necessities, daily necessities, tableware, toys, toothpaste, toothbrushes , masks, wood products, medicines, etc. It brings a lot of convenience to people's life.


China shrink packaging machine factory


So how to solve the failure of the heat shrinkable film packaging machine?

Problem 1: The shrink chamber does not heat properly.​​
(1) Check whether the temperature controller fails, if so, repair it in time or exchange it;

(2) Check whether the communication contactor is damaged, if so, it can only be exchanged;
(3) Check whether the indoor wire connectors are aging and short-circuited. If yes, connect them from the beginning;
(4) Check whether the electric heating tube is damaged, and if so, replace it.​​

 

Problem 2: The thermal motor doesn't roll.​​
(1) Check whether the fan is damaged, if so, replace it;
(2) Check whether the hot air switch is damaged. Similarly, it should be replaced in time;
(3) Check whether the fan blade is stuck. If yes, touch it and open it from the beginning. It is recommended that the operator check it after each operation.​​

 

Problem 3: The drive motor does not roll.​​
(1) See if the motor switch fails, and exchange it in time.
(2) Check whether the high-speed device is damaged and replace it in time;
(3) Check whether the motor is burnt due to overheating, and if so, replace it in time.​​

 

As an operator, there must be relevant technical control measures to prevent the performance deterioration of the heat shrinkable film packaging machine and the possibility of equipment failure. It needs to be cleaned after get off work every day, and regularly check whether the screws are fastened.